EZ105-P 5-stage RO System with Booster Pump Pur...

Description EZ105 -P 5-stage RO System with Booster Pump Pure Pro .  Economy RO system that produces fresh clean and healthy water coming from any water source (river, lake etc) This RO system includes 5 stages for water treatment 1st stage: RS 300-ST (quick change):  5-micron Sediment Filter. It is effective in removing dirt, rust and sand particles. 2nd stage: RS300-ND (quick change):  1-micron Granular Active Carbon Filter. It takes out 99% of the chlorine and organic chemicals. It provides enhanced reduction of taste, and odor. 3rd stage: RS300-RD (quick change):  1-micron Granular Active Carbon Filter. It takes out 99% of the chlorine and organic chemicals. It provides enhanced reduction of taste, odor, and color. 4th stage: TW30-1812-50: TFC RO Membrane (0.0001 micron). A thin film composite (TFC) high quality membrane that processes 100 gallons per day. It remove the following hard water contaminants that may be present in your water: lead, cooper, barium, chromium, mercury, sodium, cadmium, fluoride, nitrates, and selenium. 5th stage: Post Carbon Filter: This carbon post filter removes objectionable tastes and odors to enhance the quality of your drinking water. We are using NSF approved post carbon to guarantee the taste of water. Filter & Membrane replacement : The filters of stages 1 , 2, 3, 5 should be replaced every 6 months or every 6000 L of water (whichever comes first)  The RO Membrane of stage 4  should be replaced every 2 – 3 years or every 37.800 λίτρα νερό (whichever comes first) Quick-change cartridge filters (No tools required!) Replacing the filters on this system is one of the easiest to do. Quick-Change Filter Cartridges make cartridge replacement fast, clean & easy, without contact with used filter material . No Mess, No Fuss with these filters just remove the old ones and install the new filters.  Technical Features: Booster Pump Capacity of the water tank: 12L Weight of the filtering system: 8 Kg Weight of the water tank: 4 Kg Dimensions of the system : 29cm (length) x 21 cm (width) x 42.5 cm (height) Dimenstions of the water tank: 28 x 28 x 35 cm Working Pressure : 0,35 – 5,52 bar Water Production:  190 L/ day You can also upgrade your RO system by adding 1, 2 or 3 of the following filters:   Mineral Filter: This filter improves the qualities of clean water by adding necessary for proper human development and health minerals, such as Calcium, Magnesium, Sodium, Potassium and others readily found in many natural mineral waters. Infrared Filter:  FIR causes resonance with water molecules. It ionizes and activates water molecules in our cells and blood thus improving our blood circulation and health condition. Alkaline Filter: pH 8 – 9.5   or   Alkaline Filter PLUS: pH 8.5 -10:  This filter changes the acidic RO water into a perfect Alkaline Ionized Water. It simply gives back minerals such as ionized calcium, magnesium, sodium, potassium ion, which were taken away while purifying the water. It produces alkaline water (pH value 8.00 – 9.5) which helps your body maintain a healthy pH level. Deionization Filter:  It produces 99.99% pure water by simply attaching this convenient deionization filter with RO unit. Convenient post RO filtration DI unit (RO/DI unit) provides crucial supplemental filtration to remove most impurities for pure polished product water. Excellent in areas with hard water. Produce 99.99% pure water. It will give you 0 ppm TDS, Conductivity attainable less than 0.1uS/cm.  The post deionizer takes the small percentage of contaminants that the membrane could not remove and filters this to greater than 99.99% pure. It will give you 0 ppm TDS, Conductivity attainable less than 0.1uS/cm or resistivity of close to 18 meg.ohm.